Friday, May 29, 2015

Pneumatic Stuffer Boxes for Prototyping/Sampling/Micro Molding


 
             

 
**Prototyping ** Short Run Molding **
**Micro-Molding**

Tired of cleaning pumping units after constant material changes? Don't want the hassle of setting up or having to break down a pumping unit from production?   M.R. Mold & Engineering's STUFFER BOX is your answer for prototyping, short run molding or micro-molding!

 
CAPABILITIES OF BOTH UNITS:
Ø  Chamber is 420 hardened stainless steel
Ø  3/4-14 NPT female thread to connect the Stuffer Box to your molding machine
Ø  Material is fed directly into the machine barrel, eliminating cleaning a pumping unit and material feed mechanism

                 Low Volume High Pressure 27 ci                       
                                  LVHP27
Ø  Volume:  27 cubic inches or 1.1 pounds of pre-mixed material
Ø  Capable of feeding LSR, gum stock silicone and some organic rubbers
Ø  Controller regulates air pressure to 120 psi; 1200 psi on the material; a 10:1 ratio
 $7,500.00
 
              High Volume, Low Pressure 78 ci
                                  HVLP78
Ø  Volume:  78 cubic inches or 3.1 pounds of pre-mixed material
Ø  Capable of feeding LSR and gum stock silicone
Ø  Controller regulates air pressure to 120 psi; 330 psi on the material; a 2.75:1 ratio
         $8,500.00
 
INQUIRE AT INFO@MRMOLD.COM
             
 

Silicone Elastomers class - July 21-23 - Penn State Behrend