Thursday, May 31, 2018

ENGEL e-victory 120T Purchased

M.R. Mold purchased a second ENGEL e-victory 120T molding machine to provide their customers more effective mold sampling.

Thursday, May 24, 2018

Current LSR Material Trends in the Molding of Medical Devices

Where is the evolution of LSR use—for molders, formulators, and especially designers and device engineers—headed in the coming years?
Image of a flex circuit overmolded with LSR for an orthodontics application (mouthpiece) built by M.R. Mold & Engineering, courtesy of Rogan Molding Technologies.  
For many years, liquid silicone rubber (LSR) has been used in a range of medical devices—from seals, plungers, and gaskets in implanted and non-implanted devices, to buffering for lung catheters, where soft LSR prevents tearing of delicate lung tissue as the catheter is inserted, to providing dampening for top housing covers on devices.
LSR cures faster than traditional rubber materials and offers properties well-suited for use in medical devices, among them heat-resistance, extreme low-temperature flexibility, chemical resistance, biological inertness, and an intrinsic capacity for reducing friction. LSR also cures completely and quickly, which is especially critical for implanted devices because the device will not leach chemicals and cause potential adverse reactions. In many cases, this has led to LSR replacing latex, a material long used in the medical industry, which does not fully cure during production and can lead to adverse reactions in patients.
In addition, because LSR degrades only at very high temperatures—higher than most other polymers can survive—LSR can tolerate sterilization processes, further increasing its application in medical uses.

While other soft materials, such as thermoplastic elastomers (TPE), duplicate some of its characteristics, LSR offers a unique combination of biocompatibility, resistance to extreme temperature, durability, design flexibility, and moldability. LSR has also continued to evolve, offering even more capabilities.
Designers of new devices routinely specify LSR in their designs. As a result, suppliers of LSR have had to respond to the challenges of these new and often more complex designs by developing new formulations. In turn, as designers have responded by specifying the new formulations in new and more complex designs. Injection molders have also had to adapt to new material performance and new designs with enhanced molding capabilities. The result of all this interaction has been a continuous evolution of LSR formulations and applications.
New Materials
The development of new LSR formulations is ongoing. These new formulations are often the result of new challenges in device designs, but suppliers of LSR are also continually working to develop new formulations that offer new advantages to device designers. The benefits offered by these new formulations include higher tear strength, giving devices wider applications and a longer working life; a longer shelf life, which benefits molders by reducing the waste involved in discarding excess LSR inventory past its use-by date; longer pot life (the time following mixing during which LSR can be molded) that gives molders more molding flexibility; and higher levels of elongation, creating greater part flexibility.
These expanded features enable molders to meet the challenging geometries that often come with new device designs, as well as create greater flexibility for designers. Essentially, new materials with new performance parameters create opportunities for innovation. But new materials also affect the practical applications of the devices themselves.
It is critical for device manufacturers and designers to make the effort to be aware of new materials being developed and the advantages they offer. Too often, companies tend to stay with the materials that have worked in the past and that have already been through the time-consuming approval process. Manufacturers need to stay connected with suppliers to explore the new materials that are continually being developed.
Image at right: A self-bonding LSR bellow overmolded onto thermoplastic for medical device dispensing equipment.
New Demands, New Devices
The medical device marketplace is a fast-changing one, and new technology and new applications are requiring new designs that affect the evolution of LSR formulations. New device materials require improved characteristics such as softness, stretchability, resiliancy, and durability.
To respond to ever-changing market trends and needs, materials suppliers continue to innovate to close need gaps. For example, materials with low durometers, high elongations, and increased tear strengths are required to meet the needs of current and upcoming medical devices. LSR molders are anticipating the needs of future medical equipment and continue to improve their manufacturing capabilities.The following are among the trends they are accommodating:
  • Devices are continually becoming both smaller and more intricate. This is especially true of wearable and implantable devices, which are growing in both number and capability. This trend requires new LSR formulations that enhance LSR’s flexibility, enabling molders to extract products successfully from complex molds with undercuts.
  • As wearable devices increase, these flexible devices require softer LSR formulations that enable the device to work as the patient moves, without loss of function and with minimal patient discomfort.
  • Today’s wearable devices also often include wireless electronic reporting functions that require batteries to operate. LSR overmolding on these devices must be completed at lower temperatures (high temperatures tend to damage smaller batteries). This is requiring the development of LSR that cures at lower temperature, which is currently ongoing.
  • There is continual pressure for medical devices, especially those being developed for home or on-the-go use, to be even smaller, to make life easier for patients, and to provide more detailed monitoring and data gathering. This, in turn, makes new demands on device designers, LSR suppliers, and molders, who will need to work together to meet the challenges.
The demands created by each new medical device design may require a new LSR formulation. As these new formulations come into use, they add to the growing variety of LSR formulations available for designers to incorporate into their new designs.
New Molding Challenges
Just as material evolution often responds to design trends, LSR molding often responds to the development of both new designs and the new formulations developed for use with them. Smaller and more intricate device designs require different molds and molding techniques, and the proliferation of wearable devices and those incorporating electronic communication features add to that need to adapt.
As a result, manufacturers are turning to the molders that they know have the expertise and equipment to meet their specific molding needs. In addition to keeping abreast of the techniques for molding these new devices, molders that can meet these new demands should keep their customers and potential customers advised of their updated capabilities.
Another new development in the molding industry is the prospect of creating devices that incorporate LSR using 3D printing. A challenge that has plagued molders and device manufacturers for years is how to produce prototype devices for approval quickly and cost effectively. This has traditionally been done with one- and two-cavity molds and, more recently, with aluminum molds. But the ability to produce a prototype device in small numbers using 3D printing would completely eliminate the need for a mold, reducing delivery time and cost, and making modifying and producing second-stage prototypes simpler and less costly.
There is also the potential with 3D printing to produce personalized devices for individual patients tailored to their unique medical and physical requirements. LSR formulations developed for 3D printing already exist, but material suppliers are currently working to reduce cure times in order to make the process practical. Meanwhile, forward-thinking molders are becoming familiar with 3D printing technology and evaluating its capability and its limitations prior to adding it to their capabilities.
The Regulatory Scene
All developers and users of medical devices, including those that incorporate LSR, need to be aware of changing regulatory requirements, both those affecting material quality standards and device (and device part) traceability. For example, current regulations (21 CFR 821) now require medical devices to include unique device identifiers (UDI), which could include electronic signature chips on certain individual devices, to facilitate track-and-trace requirements and potential recalls. It is anticipated that future requirements may also require electronic identification of individual device parts as well.
In the recent past, companies introducing new devices have often registered them first with regulatory bodies in the EU, where registration has been less costly and less time-consuming. That is beginning to change, as the EU has become both more costly and paperwork-intensive. We may now see it become more practical for companies to register new devices first with FDA.
Looking Forward
Where is the evolution of LSR use—for molders, formulators, and especially designers and device engineers—headed in the coming years? New formulations will no doubt continue to open new doors for designers and create new molding challenges for molders. In turn, new applications for medical devices will raise new challenges for manufacturers, molders, and material suppliers, especially as wearable and implanted devices increase, become even smaller, and take greater advantage of wireless technology to communicate data.
A major advancement in the LSR arena is a multicomponent system that gives molders flexibility and enhanced control related to cure kinetics. This system approach enables molders to select and optimize the cure speed for part size and dimension, reducing cure time by up to 60%. This can also provide improvements in low-temperature cure applications when overmolding electronic, plastic, and active ingredient applications. As molders know, cure time is the largest part of LSR molding cost, and this would significantly reduce that cost.
LSR suppliers also see greater opportunities for formulations with lower durometers that result in softer surfaces, especially in providing better performance and greater comfort to patients in wearable devices. This is still a solution that formulators are working on. Current lower durometer materials face problems in situations where repeated use is required, for example, because they pick up surface materials that change their surface softness. New formulations may be able to change this.
Another ongoing goal is to develop LSR materials that can be produced more quickly, at lower temperatures, and at lower cost. These new materials could reduce the overall cost of molding as well as support further miniaturization and the molding of disposable devices.
These innovations are being actively explored by leading silicone suppliers such and medical device manufacturers. All players in the industry—manufacturers, molders, and material suppliers—should work together to cooperate to lead this continuing growth. Each will have specific needs as these developments take place, and each brings different skills and experience to the table to make them happen. But all players benefit from the result, and most importantly, patients benefit from the collaboration.
Rogan will be exhibiting at Booth #528 and Elkem Silicones at Booth #829 at MD&M East 2018 in New York City June 12-14. 

[All images courtesy of ROGAN MOLDING TECHNOLOGIES]
Jim Ritzema and Feifei Lin

Jim Ritzema and Feifei Lin

Jim Ritzema, president of Rogan Molding Technologies, has been with the injection molder for more than 30 years, successively as engineering manager, director of operations, and director of new product development. He is also a member of the advisory board of LSR World magazine. Rogan provides more than 80 years of experience in partnering with customers to produce quality molded parts and assemblies.

Dr. Feifei Lin, business development manager for Elkem Silicones, has more than 20 years of technical and marketing silicones experience with Dow Corning prior to joining Elkem. Elkem Silicones has more than 3100 employees around the world dedicated to providing silicone solutions for diverse specialty markets. The company operates 10 multifunctional manufacturing sites and R&D centers around the globe, including one in York, SC. Elkem Silicones is a division of the Elkem Group, a $3 billion global world leading provider of environmentally responsible silicon-related materials.

Reshoring Adds 171,000 Jobs in 2017

May 2018

Reshoring Initiative

Reshoring Adds 171,000 Jobs in 2017: Implications for the Trade Debate

171,000 U.S. Reshoring and Foreign Direct Investment (FDI) jobs announced in 2017, up 2,800 percent since 2010
The total number of manufacturing jobs brought to the U.S. from offshore is now over half a million since the manufacturing employment low of 2010, providing strong evidence that jobs can continue to be successfully brought back. Industry Week's "Reshoring is on the Rise: What it Means for the Trade Debate" discusses how reshoring can lower the trade deficit.
Reshoring Initiative
Source: Reshoring Initiative 2017 Data Report

In the News

A recent report favors the U.S. drive for increased competitiveness. Research by Oxford Analytics shows Chinese indexed unit labor costs rising rapidly again after several years of stagnation.
Indexed Unit Labor Cost in Manufacturing in Selected Countries
Reshoring Initiative
See the Newsletter Supplement for related articles on trend topics, including: U.S. tax cuts to increase German investment in U.S. by 39 billion Euro; problems with import overhead and currency fluctuations; and the impact of trade on U.S. manufacturing.

Our Current Initiatives

We are continually developing tools to help the reshoring trend grow. Here are some of the products we are working on:
  • Import Substitution Program (ISP): Helps manufacturers, trade associations, equipment sellers, MEPs and economic development organizations identify and qualify major relevant importers and convince them to reshore. It also helps to identify supply chain gaps that can be filled by FDI. Contact us for help.
  • Competitiveness Toolkit: Enables the government to select the optimal national policies to bring back a desired number of the five million offshored manufacturing jobs.
  • Back Office Reshoring Research with Projected 50% savings vs. offshore:  The Reshoring Initiative and Intellilink have joined forces to conduct the research. The purpose is to confirm the value proposition of reshoring back office processes (BOP) by using local U.S.-based staff and Robotic Process Automation (RPA) software. If the project is successful, the participating company will achieve higher productivity and an ongoing 50% cost savings vs. offshore outsourcing. The U.S. will have the potential to bring back up to one million BOP jobs. We are seeking a suitable company to participate in the study. Follow the link for details and participation benefits.
  • Manufacturing Reshoring Survey: Results will be released by mid-May. You can then visit this blog to find out: (1) why companies produce and source so much offshore; (2) how big the price gap is, U.S. vs. offshore; and (3) what national and corporate policy changes are needed to make more reshoring viable for individual companies.
  • Second National Reshoring Award: Submit your reshoring case. The 2018 Award competition is sponsored by PMA (Precision Metalforming Association) and the Reshoring Initiative. We can help you reshore now, in time to meet the September 1, 2018 deadline. The Reshoring Initiative would like to have similar Reshoring Awards for other industries. Contact us with ideas.

Wednesday, May 23, 2018

NPE 2018 a HUGE success

Events such as NPE are places to renew old friendships and create new ones!  Many customers, colleagues and friends stopped by to say hello.  Even more new acquaintances came by the booth to learn about M.R. Mold and discuss future projects.  Thank you everyone for a great experience!

LSR 2018 - an experience you won't forget


  1855 South Harbor Boulevard
  Anaheim, CA  92802

LSR 2018 - It's where you'll meet the Industry Leaders in Silicone - September 11-13, 2018

This 3 day conference is an unparalleled opportunity to learn crucial information on the latest developments in Liquid Silicone Rubber.

Twenty eight industry experts and leaders will discuss a broad range of topics.  From business and market dynamics to new materials, innovative machinery and processing, the learning begins here.  Click here to view the entire agenda.  

The conference includes a visit to ENGEL Corona on the third morning for demonstrations in LSR processing.

Conference Topics:
Material Innovations
  • Enhanced features
  • Additives
  • New chemistry
  • Machinery
  • Metering equipment
  • Cold runner technology
  • LSR mold technology
  • Robotics
  • Micromolding
  • 2 component molding
  • Optical parts
  • Cleanroom
  • Inspection
  • 3D printing
  • Emerging technologies
Part and process design
  • Part simulation / FEA
  • Process simulation
Industries / Applications
  • Automotive
  • Medical
  • E&E
  • Consumer goods
  • Infant care

A block of rooms at the Sheraton Park have been reserved for conference attendees at a special rate of $139 per night.  LSR 2018 group rate is available until
August 9, 2018.

Early bird conference fee $995.00
Includes 1 enrollment in the conference, conference proceedings, Continental breakfasts, lunches, coffee breaks, evening
receptions and half day trip to ENGEL.

Monday, March 26, 2018

Collaborate to Educate on Plastics Technology

Moldmakers, industry consultants and technology suppliers collaborate to educate on plastics technologies.

Collaboration takes many forms, but one of the most powerful is when companies work together to educate others. This is something that I’ve seen quite often throughout my years covering the moldmaking industry. Most recently, for example, is a joint effort between ROI Industries and Injection Molding Solutions to develop a traveling conference giving molders and moldmakers a new understanding of the events that occur in and along the melt delivery system, such as watt-to-mass ratio, time to reach setpoint, wattage distribution, end loss, heat sink and point of temperature control, all of which impact the ability to achieve an optimized process via scientific molding principles. Then there’s MoldTrax and the AIM Institute who joined forces on a workshop to explore strategies to optimize mold performance, maintain efficiency, maximize part quality and minimize machine downtime. And, last but not least, Progressive Components and Incoe came together to produce a tech day to share the importance of monitoring molds to benchmark key performance indicators to improve overall company performance. So, you might be thinking, why this focus only on collaboration within the plastics side of moldmaking? Well, I have one word for you NPE!

With this triennial event only three months away, I have plastics on the brain, which also calls to mind the variety of collaborations set to occur on the NPE show floor among moldmakers, molders and equipment manufacturers. Not only will these collaborations market each company’s wares and capabilities, they will educate attendees on new processes, strategies and technologies. For example, Mold Craft of Willernie, Minnesota, worked with Wittmann Battenfeld to organize a demonstration of the technology behind ±0.0001-inch precision-tolerance micro molding of POK parts weighing only 0.007 grams. Mold Craft will be molding a 100┬Ám filter screen, using a two-cavity, three-plate micro mold with one “A” side and 2 “B” sides, featuring 0.004” x 0.004” shut offs and 0.002” radii on a MicroPower 15t precision press with a rotary platen, end of arm tooling and a robot with camera.

M.R. Mold & Engineering of Brea, California, has multiple partnerships resulting in three scheduled collaborative demonstrations, including a four-cavity in-mold slitting duckbill mold running in Krauss Maffei's KM 51-55PX silicone molding machine. ShinEtsu Silicones will provide its KEG2000-50 material and a Graco F4-5 pumping unit will make this a fully automated cell. M.R. Mold will also run a four-cavity magnifying glass tool in Toyo's Si110-6 horizontal silicone molding machine. The parts will be produced with ShinEtsu's X-34-1972-3 optically clear silicone using a Yushin FRA-05155S-17-8.5 robot and a F4-5 pumping unit supplied by Graco to provide a fully automated process. To top it off, M.R. will run an optically clear two-cavity mold in Milacron's Roboshot Alpha molding machine using Zeiger Industries' LSR plug-n-play conversion kit. Elmet's new top 5000P pumping unit, R.D. Abbott's optically clear silicone and Yushin's YC-70S-14-8 robot complete this partnership for a completely automated process.

Other exciting collaborations are under development for the event, but we’ll bring you a full report during and after the event. MMT will be exhibiting in the Moldmaking Zone, so be sure to stop by.

If you are collaborating to educate, send me an email at or call 513-338-2187, and we’ll help spread the word.